Using m – Calculated Industries 4094 User Guide User Manual
Page 17
U
ser
’
s
G
Uide
— 15
using m+
KEySTRoKES
DISPlAy
m+ 355.
m
m+ 255.
m
7
(M-)
m- 745.
m
TTl – 135.
m
AvG – 45.
m
cNT 3.
m
; ;
m+ – 135.
using memory Storage Keys (m1 - m9)
In addition to the standard cumulative Memory (as previously
described), your calculator has nine independent Storage
Registers – M1 through M9 – that can be used to permanently
store single, noncumulative values. The following example
shows the use of M1 (
). To use M2 - M9, replace the
presses of the key with presses of the corresponding
number key ( - ).
You can replace a value in one of these Memory registers by
storing a new value in place of the stored value.
fuNcTIoN
KEySTRoKES
Store single value in M1
clear m1
Recall m1
Example: Store 175 into M1, recall the value, and then clear
the value.
KEySTRoKES
DISPlAy
7
m-1 175.
0.
m-1 175.
m-1 0.