Calculated Industries 4094 User Guide - Manual (Page 8)

6 — P
lUmbinG
C
alC
™ P
ro

Inch – Enters or converts to inches. Entry can be
whole or decimal numbers. Also used with  for
entering fractional inch values (e.g.,    

). Repeated presses during conversions toggle
between fractional and decimal inches.

Fraction Bar – Used to enter fractions. Fractions
can be entered as proper (1/2, 1/8, 1/16) or
improper (3/2, 9/8). If the denominator (bottom) is
not entered, the calculator’s fractional accuracy
setting is automatically used. Results are always
shown in typical building fractional format.
 
Identifies/Converts to gallons per minute (gpm)
 
Identifies/Converts to liters per second (l/s)
 
Identifies/Converts to cubic feet per minute (cfm)
 
Identifies/Converts to cubic feet per second (cfs)
 
Identifies/Converts to ºC
 
Identifies/Converts to ºF
 7
Pounds (lbs) – Enters or converts a weight or
volume value to pounds.
 
Kilograms (kg) – Enters or converts a weight or
volume value to kilograms.

Meters – Enters or converts to meters.
 
Millimeters – Enters or converts to millimeters.
 
Gallons – Enters or converts to gallons.
 
Liters – Enters or converts to liters.
Plumbing Project Keys

Enters or calculates a slope ratio or slope angle.
 
(%Grade) – Used to enter or solve Percent Grade.
Calculates Percent Grade based on entered Offset