Calculating pipe drop (offset) – Calculated Industries 4094 User Guide User Manual
Page 23
Advertising
U
ser
’
s
G
Uide
— 21
KEySTRoKE
DISPlAy
0.
1. Enter Run:
RuN 24 INch
2. Enter bend angle:
/0 45.00°
3. Find the Travel:
33 15/16 INch
4. Subtract 2 times the elbow take out (2 x 3 ¾”) from the
calculated centerline Travel:
26 7/16 INch
5. Subtract 2 times the welder’s gap (2 x 3/32”):
26 1/4 INch
calculating Pipe Drop (offset)
Find the slope of a Pipe Run if it drops 6 Inches over 50 Feet.
What is its Angle and Percent Grade?
KEySTRoKES
DISPlAy
0.
1. Enter the Run:
RuN 50 fEET 0 INch
2. Enter the Offset:
ofST 6 INch
3. Calculate the Percent Grade, Slope and Angle:
% GRD 1.
GRD 0.01
SlP 0 - 1/8 INch
<Ø 0.57º
Advertising