Calculated Industries 8015 - Manual (Page 11)

[CONV] [x] — All Clear
Resets calculator to default settings.
[Rcl] [x] — Metric Mode Toggle
Toggles between metric mode and
Imperial-English mode.
Note: This mode is not reset when you
perform an all clear [Conv] [x].
[Rcl] [=] — Paperless Tape Function
Accesses the “Paperless Tape” mode
so you can check previous entries.
[Rcl] [%] — Weight Per Volume Recall
Recalls the weight per volume.
[Rcl] [/ ]— Preference Setting
Accesses user defined fractional and
exponential settings.
[Rcl] [+] — Memory Clear
Clears all Memory registers (0 – 9)
without clearing the display.
User’s Guide – 11
8015UG-E-B 7/31/03 3:43 PM Page 11