Calculated Industries 8015 - Manual (Page 4)

[+] [–] [x] [÷] [=]
Arithmetic operation keys.
[0] – [9] and [•]
Digits used for keying in numbers.
[Off] — Off Key
Turns all power off.
[On/C] — On/Clear Key
Turns on power. Pressing once
clears the display. Pressing twice
clears all temporary registers but
does not clear scales.
[Stor] — Storage Key
Used to store values.
[Rcl] — Recall Key
Recalls values stored in registers.
[CONV] — Convert Key
Used with dimension keys to con-
vert dimensions, or with other keys
to access special functions.
[SHIFT] — Shift Key
Used with other keys to access units
of measurement or other special
functions.
K
EY
D
EFINITIONS
4 – Ultra Measure Master ®
8015UG-E-B 7/31/03 3:43 PM Page 4