Calculated Industries 8015 - Manual (Page 56)

Your metric-based plan says that the
bridge rail bolt must be tightened to 30
n-m but your torque wrench only
shows ft-lb. Find the ft-lb setting
required to set up the wrench.
Steps/Keystrokes Display
1. Clear Calculator.
[On/C] [On/C] 0.
2. Enter N -m:
30 [SHIFT] [9] 30 N - M
3. Find ft/lbs:
[CONV] [SHIFT] [8] 22.12687 LB FEET
56 – Ultra Measure Master ®
8015UG-E-B 7/31/03 3:43 PM Page 56