Calculated Industries 8416 - Manual (Page 39)

Split/Lap Function
Use the [Prefs] key to determine whether
the [S/Lap] key acts like a split func-
tion or a lap function.
If the “S/LP” preference is set to “ Split, ” the
total time elapsed from the start of the
timer to the moment the
[S/Lap] key is
pressed displays.
If set to “
Lap ,” the time elapsed be-tween
presses displays. For example, the first
press of
[S/Lap] displays the time
elapsed from the timer’s start point to the
time
[S/Lap] is pressed. The second
press of [S/Lap] continues the time
display. A third press displays the time
elapsed between the first and third
presses. The fourth press continues the
time display. The fifth press shows the
time elapsed between the third and fifth
press and so on.
Even though the timer display is
stopped, the timer continues to count.
Therefore, if the second press occurred
at 30 seconds, the display at the fourth
press will show the cumulative value of
30 plus the time passed between the
third and fourth presses.
Note: Every time the [S/Lap] key is
pressed, the time elapsed is stored as a
value in the paperless tape.
User’s Guide – 39