Calculated Industries 8416 - Manual (Page 4)

Standard Calculator Keys
[On/C] — On/Clear Key
Turns power on. One press clears
the last entry. Two presses clear all
temporary registers.
[Off] — Off Key
Turns power off and resets all
non–permanent storage registers.
[Rcl] — Recall Key
Used to recall stored values.
[Stor] — Storage Key
Used to store values.
[Conv] — Convert Key
Used to convert values from one
convention to another or to access
special functions.
[0] through [9] and [•]
Keys used to enter digits.
[+] [–] [x] [÷] [=]
Basic arithmetic operation keys.
[%] — Percent Key
Four–function percent key.
[Conv] [%] — Delta Percent
Calculates the percent difference
between two numbers.
K
EYPAD
F
UNCTIONS
4 – NautiCalc Plus ™