Calculated Industries 8416 - Manual (Page 9)

Timer Function Keys
[Timer] — Stopwatch/Timer
Used to access, start and stop the
timer.
[S/Lap] — Split/Lap Function
Pauses the timer display without stop-
ping the count. If the
S/LP preference is
set to “ Split, ” the total time elapsed from
the start of the timer to the moment the
[S/Lap] key is pressed displays.
If set to “ Lap ,” the time elapsed
between presses displays. For exam-
ple, the first press of
[S/Lap] displays
the time elapsed from the timer’s start
point to the time
[S/Lap] is pressed.
The second press of [S/Lap] continues
the time display. A third press displays
the time elapsed between the first and
third presses. The fourth press contin-
ues the time display. The fifth press
shows the time elapsed between the
third and fifth press.
Note: Even though the timer display is
stopped, the timer continues to count.
Therefore, if the second press occurred at
30 seconds, the display at the fourth press
will show the cumulative value of 30 plus
the time passed between the third and
fourth presses.
User’s Guide– 9