Calculated Industries 9226 - Manual (Page 12)

[H:M:S]— Hours/Minutes/Seconds
Used for two functions: (1) to estab-
lish a “real-clock-time” mode for
entering and calculating real time
(H:M:S – hours, minutes, seconds);
(2) to convert a time code, film
footage or frame value to real time.
[Frms] — Frames
Enters a frame value or converts
(when used with the [Conv] key) a
displayed time code or film footage
value to a decimal frame value.
[Dec] — Decimal Math Mode
Toggles the calculator to decimal
math mode and clears the display to
“0.” This mode is only used for reg-
ular math calculation. It cannot be
used for time code, real-time or film
footage calculations.
[In] — In key
Enters or calculates the start point.
Calculates the “in” starting point
based on the values in the [Dur] and
[Out] registers.
12 – Frame Master ® II