Calculated Industries 9226 - Manual (Page 37)

Setting Film Speed — [fps]
The default value for film speed is 24
frames per second. This key sets the fps
used by the [16mm], [35mm] and
[Cust] keys. To set a new value:
(1) Clear the calculator and select dec-
imal mode.
[On/C] [On/C] [Dec]
(2) Enter the number of frames per sec-
ond you want to set.
25.
(3) Press [Stor] [fps] to save this value
as the new fps setting.
[Stor] [fps] — 25
(4) Press [Rcl] [fps] to verify your entry.
[Rcl] [fps] — 25
Example: Setting 30 fps Film Speed
Enter and store 30 fps.
Steps Keystrokes Display
Clear calculator [On/C] [On/C] 0.
Enter value [Dec] 3 0 30.
Store as fps [Stor] [fps]
FPS
30.
Verify entry [Rcl] [fps]
FPS
30.
User’s Guide – 37