Calculated Industries 9226 - Manual (Page 23)

Preferences
The Frame Master II includes a special
preferences function that allows you to
customize the calculator for your spe-
cific needs or special situations. To ac-
cess the preferences function, simply
press the [Prefs] key. Successive presses
of that key will scroll the various
options which may be altered.
1 – NTSC Reference (59.94 Hz/60 Hz)
2 – Timer Format
• Real Time (1 dec. place)
• Real Time (2 dec. places)
• 30 NDF Time Code* (59.94/60 Hz)
• 30 DF Time Code* (59.94/60 Hz)
• 25 fps PAL Time Code
• Custom Time Code
• 16mm Feet:Frames
• 35mm Feet:Frames
• Custom mm Feet:Frames
• Real Time (0 dec. places)
3 – Timer Count-Down Buzzer (On/Off)
4 – Audible Key Press Beep (Off/On)
5 – H:M:S Roll-over (100-hr./24-hr.)
6 – Time Code Frame Rounding (On/Off)
(Rounds up a remainder of 5 or more if On;
if Off, truncates to lower-frame value.)
* If your Timer is set to NTSC 30-NDF or 30-DF, it will
use the 59.94 Hz/60 Hz reference setting of #1.
User’s Guide – 23