Calculated Industries 9226 - Manual (Page 39)

User’s Guide – 39
Setting Custom Time Code
The default value for custom time code
is 30 frames per second (fps). This fps
setting is used by the [CusTC] key
only. To set a new value:
(1) Clear the calculator and select dec-
imal mode.
[On/C] [On/C] [Dec]
(2) Enter the number of frames per sec-
ond you want to set.
24
(3) Press [Stor] [CusTC] to save this
value as the custom time code setting.
[Stor] [CusTC]
(4) Press [Rcl] [CusTC] to verify your
entry.
[Rcl] [CusTC] — 24
Example: Setting 60 fps
Enter and store 60 fps.
Steps Keystrokes Display
Clear calculator [On/C] [On/C] 0.
Enter value [Dec] 60 60.
Store value [Stor] [CusTC]
CFPS
60.
Verify entry [Rcl] [CusTC]
CFPS
60.