ClearCube C/Port & MVX - Manual (Page 13)

Fiber Solution • 3
Fiber Solution
This section describes:
•
C7420 Fiber C/Port
• F6150–160 fiber transceiver
C7420 Fiber C/Port
The C7420 is connected to an F6150–160 fiber transceiver, and the fiber transceiver is
connected to ClearCube PC blades. When deployed using a secure point-to-point fiber
connection, data displayed to the desktop does not commingle with any network traffic, and
users cannot disconnect the fiber desktop for use with a PC or notebook. C7420 does not
require special OS drivers.
The C7420 securely extends user desktops from centralized PC blades. This point-to-point
fiber optic solution supports existing fiber cabling infrastructures that employ a pair of
multi-mode fibers for each user. On the back-end, the C7420 connects to a F6150 fiber
transceiver chassis using a pair of 62.5µm or 50µm, multi-mode fibers through an LC connector.
ClearCube’s digital fiber optic extension technology leverages PCoIP™ technology to deliver:
•
High-end PC experience for up to two monitors. You can configure each monitor
independently, specifying resolution and portrait or landscape orientation.
• Transparent USB redirection from the C7420 back to the PC blade. Standard peripheral
connections include:
– USB (including isochronous USB devices)
– HD audio input and output
– Digital and analog video
• Standard PC blade connection up 2,000 meters or greater
• Small form factor pluggable (SFP) single or multimode fiber optic modules