Power harmonics and flicker, Safety compliance, Ce marking – ClearCube C/Port & MVX User Manual
Page 54
44 •
Regulatory Compliance
•
EN 61000-4-5: 1995, Surge Immunity Requirements, performance criteria: 2/1 kV
•
EN 61000-4-6: 1996, Conducted Disturbance Induced by Radio-Frequency Fields
Immunity, performance criteria: 3 Vrms
•
EN 61000-4-8: 1994, Power Frequency Magnetic Field Immunity, performance criteria: 1
A/m
•
EN 61000-4-11: 1994, Voltage Dips, Short Interruptions and Voltage Variations Immunity,
performance criteria: 95%-5c and 250c, 30%-25s
Power Harmonics and Flicker
Other requirements that this equipment has been found to comply with are:
•
EN 61000-3-2: 1995, Limits for Harmonic Current Emissions (equipment input less than
or equal to 16 A per phase)
•
EN 61000-3-3: 1995, Limitation of Voltage Fluctuations and Flicker in Low Voltage
Supply Systems for Equipment with rated Current = 16 A
Safety Compliance
The C3-R Chassis, R1200 Blade, R2100 Blade, C/Port and MVX was tested and is certified to
the following safety standards:
•
UL 60950 3
rd
Ed., 7-28-95 with revisions through and including 3-1-98, TUV Rheinland
of N.A. (an OSHA accredited Nationally Recognized Test Laboratory) Certificate
CU72040336.
•
CAN/CSA-C22.2 No. 60950-00, TUV Rheinland of N.A. Certificate CU72040336
•
IEC 60950:1999, CB certificate US-TUVR-2088
Country Deviations from CB Bulletin 107a considered under the scope of the above
certificate are, but may not be limited to; Argentina, Austria, Australia, Belgium, Brazil,
Canada, Switzerland, China, Czech Republic, Germany, Denmark, Spain, Finland,
France, United Kingdom, Hungary, Ireland, Israel, India, Italy, Japan, Korea, Malaysia,
Netherlands, Norway, Poland, Portugal, Russia, Sweden, Slovenia, Slovakia, Singapore,
Turkey, Ukraine, United States, and South Africa.
•
EN 60950:2000 – European Norm - Safety of information technology equipment.
•
AS/NZS CISPR 22:2002 and AS/NZS 60950:2000 (including Amendment 1), Benchmark
RCM Certificate – Accredited by the Joint Accreditation System of Australia and New
Zealand: copy number 2756a1
CE Marking
This equipment bears the CE marking that indicates compliance to the European Council
Directive 89/336/EEC (EMC directive) and the 73/23/EEC (Low Voltage Directive).
The following page is ClearCube's official Declaration of Conformity as required for CE
compliance.