Cyclopital3D FujiPix Real 3D W3 Camera - Manual (Page 26)

10
Inserting a Memory Card
1 Open the battery-chamber cover.
1 Note
Be sure the camera is off before opening the bat-
tery-chamber cover.
2 Insert the memory card.
Holding the memory card in the orientation
shown, slide it in until it clicks into place at
the back of the slot.
Click
Be sure card is in correct orientation; do not
insert at an angle or use force. If the memory
card is not correctly inserted, pictures will be
recorded to internal memory.
3 Close the battery-chamber cover.
Removing Memory Cards
Turn the camera off and then
press the card in and release it
slowly. The card can now be re-
moved by hand.
3 Cautions
• The memory card may spring out if you remove
your fi nger immediately after pushing the card in.
• Memory cards may be warm to the touch after be-
ing removed from the camera. This is normal and
does not indicate a malfunction.
■ ■ Inserting a Memory Card Inserting a Memory Card