Cyclopital3D FujiPix Real 3D W3 Camera - Manual (Page 79)

63
Men
u
s
Using the Menus: Shooting Mode
N N ISO ISO
Control the camera’s sensitivity to light. Higher values can be used to reduce blur when lighting is
poor; note, however, that mottling may appear in pictures taken at high sensitivities. If AUTO (1600),
AUTO (800), or AUTO (400) is selected, the camera will adjust sensitivity automatically in response to
shooting conditions. The maximum values that will be selected by the camera at settings of AUTO
(1600), AUTO (800), and AUTO (400) are 1600, 800, and 400 respectively.
1 Note
Sensitivity is not reset when the camera is turned off .