Cyclopital3D FujiPix Real 3D W3 Camera - Manual (Page 51)

35
More
on
P
h
oto
g
ra
ph
y
N Using the Flash (Super Intelligent Flash)
When the fl ash is used, the camera’s Super Intelligent Flash system instantly analyzes the scene based
on such factors as the brightness of the subject, its position in the frame, and its distance from the
camera. Flash output and sensitivity are adjusted to ensure that the main subject is correctly exposed
while preserving the eff ects of ambient background lighting, even in dimly-lit indoor scenes. Use the
fl ash when lighting is poor, for example when shooting at night or indoors under low light.
1 Choose a fl ash mode.
Press the selector right ( N). The following options will be displayed;
press the selector left or right to highlight an option and press MENU/OK.
In modes other than
A, the current mode is indicated by an icon in
the display.
Mode Mode Description Description
A (AUTO FLASH) The fl ash fi res when required. Recommended in most situations.
K (RED EYE REDUCTION)
As above, except that camera minimizes “red-eye” caused when light from the fl ash is re-
fl ected from the subject’s retinas.
N (FORCED FLASH)
The fl ash fi res whenever a picture is taken. Use for backlit subjects or for natural coloration
when shooting in bright light.
L (FORCED FLASH) As for fi ll fl ash, except that camera minimizes “red-eye.”
P (SUPPRESSED FLASH)
The fl ash does not fi re even when the subject is poorly lit. k will appear in the monitor
at slow shutter speeds to warn that pictures may be blurred. Use of a tripod is recom-
mended.
O (SLOW SYNCHRO)
Capture both the main subject and the background under low light (note that brightly lit
scenes may be overexposed).
M (RED EYE & SLOW) As for slow sync, except that camera minimizes “red-eye.”