Cyclopital3D FujiPix Real 3D W3 Camera - Manual (Page 65)

49
Co
n
n
e
ct
io
n
s
Printing Pictures via USB ( D Only)
If the printer supports PictBridge, the camera can be connected directly to the printer and
pictures can be printed without fi rst being copied to a computer. Note that depending on the
printer, not all the functions described below may be supported.
Printing in C
C pictures in MPO format can not be printed via direct USB connection, although JPEG copies created when
MPO+JPEG is selected for o 3DREC can be printed in D (pg. 85). For information on C prints, visit http://
fujifilm.com/3d/print/.
Connecting the Camera Connecting the Camera
1 Connect the supplied USB cable as shown and
turn the printer on.
2 Press the a button for about a second to turn
the camera on. t USB will be displayed in
the monitor, followed by the PictBridge display
shown below at right.
USB
00
OK SET
FRAME
SHEETS
PICTBRIDGE
TOTAL: 00000
1 Notes
• Print pictures from internal memory or a memory card that has been formatted in the camera.
• Default printer page size and print quality settings are used when printing via direct USB connection.