DJI Naza-M Lite - Manual (Page 32)

©2014 DJI. All Rights Reserved. 32
5 Voltage
STEP1: Protection Switch
In order to prevent your multi-rotor from a crash or other harmful consequences caused by low battery voltage, there
are two levels of low voltage protection available to use. You can choose to use or not to use them, however we
strongly recommend using the protections available!
Notices:
 Make sure the connection between VU and MC (V-SEN to X3) is correct; otherwise the low voltage
protection will not work properly.
 Both levels of protection have LED warning as default. Both levels of protection will blink red
continuously.
 Both level protections will only have the LED warning under Manual Mode, none in the automatic actions.
 Low voltage protections are NOT fun! You should land your multi-rotor ASAP in any level of protection
to prevent your multi-rotor from crash or other harmful consequences!
STEP2: Battery
Apply battery power the MC and connect the MC with the PC, current battery voltage will be displayed in this column.