Getting started – Dulce Systems PRO DI User Manual
Page 5
Page 8
PRO DI Installation and User’s Manual
1.2.
System Requirements
• Windows XP / Vista / Server
• Mac OS X 10.4 or higher.
• Linux / Unix.
• Apple Power Mac G5, Mac Pro
• 2 /4/8 Gb Fibre Channel Port with optical LC connection.
1.3.
Technical Support
Phone
FAX
Web
If the product requires service, please contact Dulce Systems’ Technical Support
and obtain an RMA number. Ship the product properly packaged to:
9620 Topanga Canyon
Chatsworth, CA 91311
Installation and User’s Manual
System Requirements
Server / 32 & 64-bit.
Mac OS X 10.4 or higher.
Mac Pro, Windows compatible PC.
Gb Fibre Channel Port with optical LC connection.
Technical Support
818-435-6007
818-576-0324
www.dulcesystems.com
If the product requires service, please contact Dulce Systems’ Technical Support
and obtain an RMA number. Ship the product properly packaged to:
Dulce Systems
Attn: RMA
Topanga Canyon Place, Suite E
Chatsworth, CA 91311, USA
If the product requires service, please contact Dulce Systems’ Technical Support
Page 9
PRO DI Installation and User’s Manual
2. Getting Started
The PRO DI comes pre-assembled and almost ready for use, just install the Disk
Modules, attach the Fibre Channel to the computer or the switch, and install the
JAVA RAID Manager. If you are using a Mac, you are good to go, by default the
unit is pre-formatted for Mac OS X operation. For Windows, a small format
procedure is needed.
2.1.
Packaging
Please do not discard the boxes and packing materials in case you
might need to reuse them later. Always ship the product in its original
packaging. Improperly packaged products will be subjected to shipping
damage, for which you will be liable for the repair.
2.2.
Check List
• Installation and User’s Manual.
• Power Cord (North America user only).
• PRO DI system enclosure with a FC RAID Controller.
• DI Pack with up to 16 2.5” laptop disk drives.
• One Ethernet Cable.
• One LC to LC optical Fibre Channel cable.
• One SFP Optical Transceiver.