Metrohm 896 Professional Detector – Amperometry - Manual (Page 49)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
7 Technical specifications
2.896.0020 896 Professional Detector – Amperometry
￭￭￭￭￭￭￭￭ 41
Temperature con-
trol
Temperature
stability at the
heater better than 0.05 °C with ambient temperature +8 °C…80 °C
Operation
Direct Via Software MagIC Net™
Remote Via Remote Box
Analog output With 891 Professional Analog Out
Output voltage 0…1000 mV
Full scale Can be adjusted within the digital signal range
Offset Can be adjusted within the digital signal range
System standby ￭ Automatic function test at start-up
￭ Leak sensor
￭ Temperature stability monitoring
Output channels ￭ Current rating
￭ Charge
GLP conformity Yes, optional
7.3 Power connection
Required voltage 100 - 240 V ± 10% (autosensing)
Required fre-
quency 50 - 60 Hz ± 3 Hz (autosensing)
Power consump-
tion ￭ 65 W for typical analysis application
￭ 25 W standby (conductivity detector to 40 °C)
Power supply unit ￭ Up to 300 W maximum, electronically monitored
￭ internal fuse 3.15 A