Metrohm 805 Dosimat - Manual (Page 20)

5.2 Quality Management and validation with Metrohm ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
12 ￭￭￭￭￭￭￭￭ 805 Dosimat
Caution
Take care to ensure that the contact pins do not become contaminated.
Wipe off any contaminations at once.
In the event of more serious contamination, you can use a moist cloth
(possibly with a small amount of dishwashing detergent or ethanol).
5.1.2 Maintenance by Metrohm Service
Maintenance of the 805 Dosimat is best carried out as part of an annual
service, which is performed by specialist personnel of the Metrohm com-
pany. If working frequently with caustic and corrosive chemicals, a shorter
maintenance interval could be necessary.
The Metrohm service department offers every form of technical advice for
maintenance and service of all Metrohm instruments.
5.2 Quality Management and validation with Metrohm
Quality Management
Metrohm offers you comprehensive support in implementing quality man-
agement measures for instruments and software. Further information on
this can be found in the brochure «Quality Management with
Metrohm» available from your local Metrohm agent.
Validation
Please contact your local Metrohm agent for support in validating instru-
ments and software. Here you can also obtain validation documentation to
provide help for carrying out the Installation Qualification (IQ) and the
Operational Qualification (OQ). IQ and OQ are also offered as a service
by the Metrohm agents. In addition, various application bulletins are also
available on the subject, which also contain Standard Operating Proce-
dures (SOP) for testing analytical measuring instruments for reproducibility
and correctness.
Maintenance
Electronic and mechanical functional groups in Metrohm instruments can
and should be checked as part of regular maintenance by specialist person-
nel from Metrohm. Please ask your local Metrohm agent regarding the
precise terms and conditions involved in concluding a corresponding main-
tenance agreement.