14 connecting the instrument to a computer – Metrohm 930 Compact IC Flex SeS/Deg User Manual
Page 34
Advertising
4.14 Connecting the instrument to a computer
■■■■■■■■■■■■■■■■■■■■■■
26
■■■■■■■■
930 Compact IC Flex SeS/Deg (2.930.1460)
4.14
Connecting the instrument to a computer
NOTE
The instrument must be switched off when being connected to a com-
puter.
Accessories
For this step you need the following accessories:
■
USB connecting cable (6.2151.020)
■
USB connection cable (6.2151.020) from the accessory kit: Vario/Flex
Basic (6.5000.000)
Connecting the USB cable
1 Insert the USB cable into the computer connection socket on the rear
of the instrument.
2 Insert the other end into a USB port on the computer.
Advertising