Metrohm Liquid Handling Station - Manual (Page 13)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
IC equipment: Liquid Handling Station
￭￭￭￭￭￭￭￭ 7
5 Setting the capillary to the correct length
￭ Push the capillary far enough into the bottle that it reaches the
bottom of the bottle.
￭ Tighten the tubing nipple.
The capillary is secured.
6 Inserting the stopper
￭ Screw the M8 stopper into the M8 opening of the bottle cap.
7 Filling the adsorber tube
Fill the adsorber tube as follows:
￭ some cotton
￭ CO
2
adsorber material
￭ some cotton
Seal the adsorber tube with the stopper.