Metrohm Liquid Handling Station - Manual (Page 14)

3.2 Installing the rinsing solution flow path
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
8 ￭￭￭￭￭￭￭￭
IC equipment: Liquid Handling Station
8 Inserting the adsorber tube
￭ Insert the adapter into the SGJ opening of the bottle cap.
￭ Screw the adsorber tube into the upper opening of the adapter.
Installing the capillary between the supply bottle and the
trap column
Required accessories ￭ PEEK capillary (6.1831.180)
￭ Metrosep I Trap 1 - 100/4.0 (6.1014.200)
￭ Pressure screw (6.2744.010)
1 Removing the stoppers
￭ Remove the stoppers from the trap column's inlet and outlet.
Keep the stoppers.
2 Installing the capillary to the column inlet
￭ Tighten the other end of the installed capillary to the trap column
inlet using a pressure screw.