Metrohm TitrIC 5 - Manual (Page 6)

Application Bulletin 319 e
Installation Instructions of TitrIC 5
Page 6/16
3 Cable connections
First all the power cables are connected to the instruments. Both the instruments and the PC remain
switched off. After connect the following cables according to this list:
Cable USB A - mini-DIN 8P (6.2151.000) from 856 Conductometer to PC, do not connect!
USB cable (6.2151.020) from 2.881.0010 IC (use PC port) to USB 1 of the 2.881.0030
USB cable (6.2151.020) from 2.881.0030 IC (use PC port) to USB port of the PC
USB cable (6.2151.000) from 855 Controller to PC – supplied with 855, do not connect!
MSB cable from Dosino 800, 20 mL (0.1M HCl) to 855 MSB 1, do not connect!
MSB cable from Dosino 800, 10 mL (cations) to 855 MSB 3, do not connect!
MSB cable from Dosino 800, 50 mL (anions) to 855 MSB 2, do not connect!