Metrohm tiamo 2.4 Installation - Manual (Page 13)

8.101.8056EN 13
NOTE
An UpdateLog file with a list of all files that have been copied to the
server during the program update and with a confirmation of a suc-
cessful installation is saved in the installation folder of tiamo under
bin\InstallLog.
10 In case additional licenses have been removed during the server update or
if further licenses are to be added, the Administrator can enter them in
tiamo (dialog: Configuration
▶ Tools ▶ Program administra-
tion ▶ Licenses ▶ Add licenses).
11 Updating clients
For each client, insert the installation CD and double-click the setup.exe
file. Then select Repair/Update and click on [Next >]. Complete the
installation with [Finish].
NOTE
In order to facilitate the updating of many clients, the installation can
be copied from the CD to a writeable medium and the file
tiamo_init.ini can be modified. There, user-defined parameters for the
installation (license code, installation path, server name, etc.) can be set
in advance, which allows you to only have to click through the installa-
tion.
NOTE
An UpdateLog file with a list of all files that have been copied to the
client computer during the program update and with a confirmation
for a successful installation is saved in the client's tiamo installation
folder under bin\InstallLog.
7 Installation of drivers
In normal cases, the installation routine of tiamo automatically installs all the
drivers necessary for controlling the supported devices.
If you are using a 64-bit operating system, it may be necessary to install drivers
manually in combination with a few devices. This is the case if the operating
system displays a message when connecting a device to the computer, e.g.
Device driver software was not installed. No driver found. The mes-
sage should also show the name of the corresponding device. Write down this
name and proceed as follows to install the driver manually: