Metrohm 940 Professional IC Vario - Manual (Page 31)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Installation
940 Professional IC Vario ONE (2.940.1100)
￭￭￭￭￭￭￭￭ 23
Rinsing the IC system
CAUTION
The guard column and separation column must not be installed for the
initial start-up.
Make sure that a coupling (6.2744.040) is being used instead of the
columns.
1 Preparing the software
￭ Start the MagIC Net computer program.
￭ Open the Equilibration tab in MagIC Net: Work-
place
▶ Run ▶ Equilibration.
￭ Select (or create) a suitable method.
Also see: MagIC Net tutorial and online help.
2 Preparing the instrument
￭ Ensure that the eluent aspiration tubing is immersed in the eluent
and there is enough eluent in the eluent bottle.
￭ Switch on the instrument.
MagIC Net detects the instrument and all of its modules.
3 Starting equilibration
￭ Start the equilibration in MagIC Net: Workplace ▶ Run ▶ Equi-
libration ▶ Start HW.