Metrohm 876 Dosimat plus - Manual (Page 28)

4.3 Methods
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
20 ￭￭￭￭￭￭￭￭
876 Dosimat plus
4.2.5 Selecting from a selection list
In a selection list, select the individual entries with the arrow keys [ ⇧] and
[ ⇩]. Accept the selection with [OK] or [BACK].
4.3 Methods
4.3.1 Method templates
The 876 Dosimat plus contains method templates which are already con-
figured and which can be adjusted to individual requirements.
The following method templates can be selected:
DOS Manual interactive dosing with optional calculat-
ing results.
For manual titrations.
XDOS Automatic dosing with freely selectable specifi-
cations.
The following specifications are possible:
￭ Volume and time
￭ Volume and dosing rate
￭ Dosing rate and time
You will find a detailed description of the methods in chapter .
4.3.2 Creating a new method
Proceed as follows to create a new method:
1 Open the method table
￭ In the main dialog, select Method and press [OK].
The method table opens: