Metrohm NIRS XDS RapidLiquid Analyzer - Manual (Page 84)

82 ▪▪▪▪▪▪▪
12
Lifting and transporting the Metrohm instrument
1 Always separate the module from the
monochromator (shown) before lifting or
transporting the instrument.
When the module is attached, raise this handle
to separate the module from the
monochromator.
Slide the module away from the
monochromator.
The monochromator is the heavier component.
Instructions follow.
2 When lifting the monochromator, place arms on
either side of unit as shown.
Lift with the knees, not with the back!
Lift unit up, move to a cart, and lower gently.
Do not lift from below waist level, as the unit
may be awkward to control.
Ask for assistance when lifting from lower
levels to bench height.
3 Always use a cart when moving the instrument
from one location to another.
The monochromator weighs 21 kilograms (46.2
lb.) and should never be carried, except when
moving from a bench to a cart, or back.
Modules typically weigh about 10.5 kilograms,
or 23 pounds. Use care when handling.
Safety Notice:
This equipment is to be used only for the purpose specified. If used for any other purpose, the
protection provided by the equipment may be impaired.