Always start and shut down titric first, 4 configuration of titric – Metrohm TitrIC 4 User Manual
Page 16
Application Bulletin 318 e
Installation Instructions of TitrIC 4
Page 16/16
6.4 Configuration of TitrIC
Æ TitrIC is started (MagIC Net and tiamo
TM
are started automatically after each other)
All paths have already been entered as defaults and the system is ready for work. If other paths
are used instead of the default paths, then this must be altered in the corresponding dialog
under
Workplace / Settings / …
.
TitrIC starts MagIC Net first and after the tiamo
TM
software is started.
If TitrIC is shut down then tiamo
TM
and MagIC Net will also be shut down. MagIC Net will ask
you if you want to shut down all devices. Always shut down TitrIC as the first program!
For further information please consult the TitrIC online help (
? / Show Help
) or contact your local
Metrohm agency. You can also report your problems to the following support email:
[email protected].
Always start and shut down TitrIC first!