Metrohm 940 Professional IC Vario ONE/SeS - Manual (Page 37)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Installation
940 Professional IC Vario ONE/SeS (2.940.1400)
￭￭￭￭￭￭￭￭ 29
Connecting the power supply cable
1 Inserting the power supply cable
￭ Insert the power supply cable into the instrument's power socket.
￭ Connect the power supply cable to the power supply.
2 Switching on the instrument
Switch on the instrument using the power switch.
After being switched on, the LED on the front of the instrument
flashes. The instrument conducts a system test and establishes a con-
nection to the software. Once the system test is complete and the
connection to the software has been established, the LED lights up
continuously.
4.18 Initial start-up
Even before the guard column and separation column are installed, the
entire system has to be completely rinsed with eluent for the first time.