Metrohm 822 Titration Curve Simulator - Manual (Page 12)

2.1 Connection to the MSB interface
4
822 Titration Curve Simulator, Instructions for Use
Note!
No dosing device may be connected to the 822 Titration Curve
Simulator in this case.
2.1.2 Connection to Titrandos by using an external dosing device
Connect the 822 Titration Curve Simulator with the connector cable
4 to any of the four MSB connections of the Titrando.
Connect the dosing device to the Dosing device connection 6 of the
822 Titration Curve Simulator.
Connect the Analog Output 7 with the measuring input of the Ti-
trando using the 6.2116.020 cable.
The communication protocol 1 has to be adjusted depending on
the type of external dosing device connected. 25 bit is needed for
dosing devices type 8XX, 8 bit by using a 685 Dosimat or a
700 Dosino.
variant 1:
variant 2: