Metrohm MagIC Net Empower Driver - Manual (Page 11)

▪▪▪▪▪▪▪ 9
8. Click on Add….
Note: If several systems are added, both the IP address and the MAC address have to differ.
9. Enter the following parameters:
• IP address: 000.000.000.xxx, (where x = 001-255)
e.g. start with 000.000.000.001
• MAC address: 00-00-00-00-00-xx, (where xx = 00-FF)
e.g. start with 00-00-00-00-00-01
• Instrument type: Select "Metrohm IC"
This includes all implemented Metrohm instruments, also Sample Processors and
Dosinos.
• Serial Number / Unique Name: These are the actual settings used to detect the
instrument on the USB bus and must meet the following requirements:
• The serial number must be the last five characters (including leading 0s) printed on the
serial number sticker found on the back of the instrument.
• The IC serial number must be prefixed with "IC="; the Sample Processor must be
prefixed with "SP=" (excluding double quotes).
• The IC and SP serial numbers must be separated by a space.