Metrohm 872 Extension Module Suppression – MCS - Manual (Page 17)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
872 Extension Module Suppression – MCS
￭￭￭￭￭￭￭￭ 9
3 Installation
3.1 Installation overview
The 872 Extension Module Suppression – MCS can be installed carrying
out the following easy steps:
1 Preparing the instrument
￭ Set up the instrument (see Chapter 3.2, page 10)
￭ Mount base tray / bottle holder (see Chapter 3.3, page 10)
￭ Remove transport locking screws (see Chapter 3.4, page 15)
2 Installing the peristaltic pump
(see Chapter 3.5, Page 15).
￭ Install pump tubings.
￭ Connect aspirating capillaries for the regeneration solution and
the rinsing solution.
3 Installing the suppressor
(see Chapter 3.6, Page 21).
￭ Insert the rotor.
￭ Connect the suppressor.
4 Connecting the MCS
See Chapter 3.7.2, Page 26
5 Connecting the instrument
￭ Connect the socket labeled in on the extension module and the
socket labeled Extension Module on the 850 Professional IC with
the cable 6.2156.070.