Metrohm 786 Swing Head - Manual (Page 16)

3.1 Packaging ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
8 ￭￭￭￭￭￭￭￭ 786 Swing Head
3 Installation
3.1 Packaging
The instrument is supplied in highly protective special packaging together
with the separately packed accessories. Keep this packaging, as only this
ensures safe transportation of the instrument.
3.2 Checks
Immediately after receipt, check whether the shipment has arrived complete
and without damage by comparing it with the delivery note.
3.3 Mounting the Swing Head to the Sample Processor
3.3.1 Mounting the Swing Head
Dismounting the titration head holder
1
1
2
1 Loosen the screws of the holder on both sides.
2 Loosen and remove the holder from the holder plate of the guide chain.
Use the hexagon key provided. The screws will be needed again later.