Metrohm IC Net 2.1 - Manual (Page 107)

6.11 812 Valve Unit
IC Net 2.1 99
First column Time at which program instruction is ap-
plied.
Entry range:
0.0 ... 999.9 min
If no time is entered, the program instruc-
tion is applied together with the last instruc-
tion with time entry.
Second column Program instruction (see below).
Third column Parameter for program instruction (see be-
low).
ENABLED Enable program start (a disabled program
is not started).
<Add> Add new program instruction.
<Delete> Delete selected program instruction.
<Verify> Test the time program (error messages are
displayed if program is wrong).
List of program instructions
The following program instructions can be added to the time pro-
gram on the
Program page:
Instruction Parameter entry Meaning
ValveA fill, inject Switch injection valve A to " inject "
or " fill " position.
ValveB fill, inject Switch injection valve B to " inject "
or " fill " position.
Links
The Links tab of the 812 Valve Unit is used for COM port selection
and settings (details see section 5.2.4).