Metrohm IC Net 2.1 - Manual (Page 80)

6 Devices
IC Net 2.1 72
Oven Display of current oven state.
Range Display of current measuring range.
Full scale Display of current full scale range.
Offset Display of current offset.
Cycle potentials Graphical display of cycle potentials.
Method Display of working potentials set in the
Method data frame.
Actual Display of current working potentials.
<Set> Send current parameters immediately to the
817 Bioscan. Parameters are not stored in
the system file (
*.smt ) as long as the file is
not saved.
Scan mode
The Scan mode subtab of the Method parameters tab on the 817
Bioscan window is used for parameter setting and curve display
for the scan mode. This window is only available if Mode has been
set to Scan on the Manual tab.
Parameters