Assembly, Step 7: attach the upright junction covers – Bowflex TreadClimber 3000 User Manual
Page 15
Advertising
Assembly Manual
11
Assembly
Figure 7-1
Step 7: Attach the Upright Junction Covers
Parts:
• TreadClimber
®
Base and Treadle assembly from Step 6
• (2) Plastic Upright Junction Covers
7-1
Put the plastic upright junction cover on the top of the left
upright support (See Figure 7-1).
Note: Make sure the plastic upright junction cover extends
to the rear of the machine.
7-2 Repeat on opposite side.
Advertising
This manual is related to the following products: