Bowflex TreadClimber 3000 - Manual (Page 19)

Assembly Manual 15
Figure 13-1
Figure 13-2
Step 13: Attach the Rear Cover
Parts:
• TreadClimber ® Base and Treadle assembly from Step 12
• (1) Rear Cover
Hardware:
• (4) #10 Phillips Head Screws
Tools:
• #2 Phillips Head Screwdriver (included)
13-1 Attach the rear cover to the back of the frame with the (4)
#10 Phillips Head Screws (2 per side) and the provided #2
Phillips Head Screwdriver (See Figure 13-1 and 13-2).
Assembly
Figure 14-1
Step 14: Attach the Drive Covers
Parts:
• TreadClimber ® Base and Treadle assembly from Step 13
• (1) Left Plastic Drive Cover
• (1) Right Plastic Drive Cover
Hardware:
• (6) #10 Phillips Head Screws
Tools:
• #2 Phillips Head Screwdriver (included)
14-1 Attach the left and right Plastic Drive Covers to the sides of the
base with (6) #10 Phillips Head Screws (3 per side) and the provided
#2 Phillips screwdriver (See Figures 14-1). Install upper screw first.
Note: Do not tighten hardware until all screws have been installed.