Banner SureCross DX80 Wireless Networks - Manual

Configurable Node with discrete inputs, analog inputs, battery notification, thermistor input, one discrete output, and continuous courtesy
power
Features
The SureCross™ wireless system is a radio frequency network with integrated I/O that
can operate in most environments while eliminating the need for wiring runs. Systems
are built around a Gateway, which acts as the wireless network master device, and one
or more Nodes.
• Wireless industrial I/O device with two selectable discrete inputs, two 0 to 20 mA
analog inputs, one thermistor input, one NMOS discrete output, one battery status
notification, and one continous courtesy power output
• FlexPower™ power options allows for +10 to 30V dc, solar, and battery power sour-
ces for low power applications.
• DIP switches for user configuration
• Frequency Hopping Spread Spectrum (FHSS) technology and Time Division Multi-
ple Access (TDMA) control architecture combine to ensure reliable data delivery
within the unlicensed Industrial, Scientific, and Medical (ISM) band
• Transceivers provide bidirectional communication between the Gateway and Node,
including fully acknowledged data transmission
• Lost RF links are detected and relevant outputs set to user-defined conditions
For additional information, the most recent version of all documentation, and a complete list of accessories, refer to Banner Engineering's
website,
www.bannerengineering.com/surecross .
Models
Model Frequency I/O
DX80N9X2S-CS1 900 MHz ISM Band Inputs: Two selectable discrete, two 0 to 20 mA analog, one
thermistor
Outputs: One sinking (NMOS) discrete, one continuous switch
power, one battery status
DX80N2X2S-CS1 2.4 GHz ISM Band
WARNING: Not To Be Used for Personnel Protection
Never use this product as a sensing device for personnel protection. Doing so could lead to serious injury
or death. This product does NOT include the self-checking redundant circuitry necessary to allow its use in
personnel safety applications. A sensor failure or malfunction can cause either an energized or de-ener-
gized sensor output condition.
SureCross DX80 FlexPower Solar Node
P/N 140373 rev. B 8/18/2011
0 140373 3