Banner EZ-SCREEN­ Safety Light Curtain Systems - Manual

EZ-SCREEN ™ Grid
Instruction Manual
Printed in USA 09/01
P/N 68410
9714 10th Avenue North • Minneapolis, MN 55441
Phone: 763.544.3164 • http://www.bannerengineering.com
Email: [email protected]
Section Contents
Section 1 Introduction Overview . . . . . . . . . . . . . . . . . .Page 4
Section 2 System Components and Specifications . . . .Page 10
Section 3 Installation and Alignment . . . . . . . . . . . . . .Page 16
Section 4 System Operation . . . . . . . . . . . . . . . . . . . .Page 40
Section 5 Troubleshooting and Maintenance . . . . . . . .Page 45
Section 6 Periodic Checkout Procedures . . . . . . . . . . .Page 51
EZ-SCREEN Features
• Non-contact safety device for perimeter and
access guarding from dangerous machinery
• Diverse-redundant and self-checking design to
achieve control reliability and meet IEC 61496-1
type 4 requirements
• Choose models with 2, 3, or 4 beams, beam
spacing from 300 to 584 mm (12" to 23")
• Self-contained two-part system is optically
synchronized:
Needs no external controller
Needs no extra synchronization wire
Easy and economical to install
• Operating range 0.8 to 20 m or 15 to 70 m
(2.6' to 65' or 49' to 230')
• Selectable external device monitoring
• Selectable trip or latch output
• Fast 24 millisecond output response time for all
models
• Easy-to-use removable terminal blocks or quick-
disconnect options speed and simplify wiring
• Compact, robust housing
• Multiple mounting options
• Optional accessory interface module available
for ac or larger dc loads
• Configuration settings accessible from the front,
with supplied tool. Sensor settings can be
changed while sensor remains mounted.
LISTED
US