Banner U-GAGE T30U—Level Control User Manual
U-gage, Chemically resistant ultrasonic sensors, Features
Printed in USA
05/05
P/N 122155
U-GAGE
®
Chemically Resistant Ultrasonic Sensors
Teflon®-protected sensors for harsh environments
Features
• Available option for all Banner QT50U and T30U..B models.
• Factory-installed Teflon flange and film coating bonded over the transducer provide
protection from harsh environments.
• The flange is sealed to the sensor face using a Viton
®
o-ring; other o-ring materials
may be specified (contact factory).
• Performance specifications for these models are identical to those of corresponding
standard models, with the exception of reduced sensing range (see Performance
Curves below).
• Sensor dimensions and mounting vary somewhat from corresponding standard
models (see dimensions on reverse).
Teflon
®
is a registered trademark of Dupont
™
Viton
®
is a registered trademark of Dupont Dow Elastomers
Models
Add suffix “-CRFV” to the model number of any standard QT50U or T30U..B model
sensor to get this option. For example: QT50ULBQ6-CRFV or T30UINB-CRFV. Consult
factory for information on T30U..A models.
Performance Curves
QT50U Max. Sensing Range: 200 mm to 8 m (8" to 26')
QT50U Effective Beam Pattern (Typical)
T30U..B Max. Sensing Range: 300 mm to 1.5 m (12" to 5')
T30U..B Effective Beam Pattern (Typical)
��������������������
���������������
�������
�������
�������
������
������
�
������
������
�������
�������
��������
�
���
������
���
������
���
������
���
�������
���
�������
���
�������
���
�������
���
�������
��
���
�
���
����
���
����
���
����
����
���
���������
������������
�
�
������
�����
������
�����
������
�����
�������
�����
�������
�����
�����
�����
������
������
������
������
������
������
�
��
��
��
��
��
��
��
��
������������
���������
��������������������
���������������