Belkin F1DP116SEA - Manual (Page 22)

18
Network Settings
You can configure the network IP settings via VT-100 or web interface. This section
describes configuration through the web interface.
IP Configuration
The Console Server requires a valid IP address to operate within the user’s network
environment. If the IP address is not readily available, contact the system administrator to
obtain a valid IP address for the Console Server.
There are two types of IP assignments you can choose from:
• Static IP
• DHCP (Dynamic Host Configuration Protocol)
The unit ships with DHCP set to default. If no DHCP server is found on your network, the
Console Server will boot with the following static IP address: 192.168.2.156.
The new IP configuration setting can be saved by clicking “Save & Reboot”.