Belkin F1DP116SEA - Manual (Page 42)

38
System Status and Log
System Logging
You may enable or disable the system-logging process and set the log buffer size. The
system log buffer’s default value is 50K bytes and can be allocated to up to 300KB
maximum. If the logged data grows larger than the pre-allocated buffer size, the new data
will overwrite the old data.
The following system events are logged in volatile storage cyclically:
i) SYS (system startup, idle time-out, login account authentication)
ii) SNTP (network time synchronization)
iii) LOG (clear system event log)
iv) PORT (serial port access authentication)
v) DDNS (register dynamic IP address event)