Belkin F1DP116SEA - Manual (Page 23)

19
section
Network Settings
IP Filtering
The IP filtering function keeps unauthorized hosts from accessing the Console Server by
specifying rules.
The IP address/mask specifies the host range by entering the base host IP address followed
by “/” and the subnet mask (“/” is a required separator between the IP address and the
subnet mask). The host IP addresses are filtered based on the rule defined.
The table below provides examples of IP address/mask settings.
The “Port” is a port or port range of the Console Server to which hosts try to access.
Chain Rule
The chain rule determines whether the access from the hosts is allowed or not. It can be one
of two values:
• ACCEPT: access allowed
• DROP: access not allowed
Specified host range Base host IP address Subnet mask
Any host 0.0.0.0 0.0.0.0
192.168.2.120 192.168.2.120 255.255.255.255
192.168.2.1 ~ 192.168.2.254 192.168.2.0 255.255.255.0
192.168.0.1 ~ 192.168.255.254 192.168.0.0 255.255.0.0
192.168.2.1 ~ 192.168.1.126 192.168.2.0 255.255.255.128
192.168.2.129 ~ 192.168.2.254 192.168.2.128 255.255.255.128