Belkin F1DP116SEA User Manual
Page 39
Advertising
35
section
Serial Ports
5. Choose the port number to which you wish to connect and the screen below will appear.
6. Type in the user name and password. The data-channel connection between port 16 and
the selected serial port will be built, so the administrator can control the serial device or
server.
7. Press the “Cntl” and “C” keys to get out of the serial-to-serial function and return to the
main console screen.
Note:
• In order to show the following serial-to-serial configuration screen, you need to
enable the serial-to-serial function. The default baud rate is fixed as 9600 8N1 (not
reconfigurable) in order to get the best compatibility with third-party terminal monitor
devices.
Advertising