Watts FMHC-90 - Manual

“Jumbo” Cartridge Filters
The ideal filter housings for optimum convenience and savings! Flow-Max ® jumbo filters are designed
to accept “jumbo” cartridges for easy installation and replacement. Filter housings are constructed
using 316L stainless steel, and are rated for pressures to 150 psi. Pipe fittings on single cartridge models are
2” MNPT, with pressure gauges installed on inlet and outlet fittings. Convenient, band clamp lid closure is easy, safe
and secure. Protective poly coat over stainless steel is standard finish. Electro-polishing is available
by special order. Replacement cartridges are available in a wide range of micron ratings.
Features
• Housings accept “jumbo” cartridges for optimum convenience!
• Heavy-duty stainless steel construction for durability
• 316L stainless steel for greater resistance to chemical attack
• Band clamp lid closure is convenient, easy and secure
• Pipe fittings are readily accessible for easy installation
• Pressure gauges are installed on pipe fittings (single cartridge models)
• Superior sealing provided by threaded compression cap & stand-off ring
• Heavy duty mounting legs are standard
• Electro-polishing is available by special order
• Pressure ratings to 300 psi available
• 6 models available for a wide range of flow rates
• Swing bolt & davit closure on 3, 5 and 8 cartridge models
Specifications
Model No. Max. Flow Cartridge Model Pipe Size Drain Size Ship Weight
FMJCH40 50 GPM “40” (1) 2” MNPT 1/2” 31 lbs.
FMJCH90 100 GPM “90” (1) 2” MNPT 1/2” 56 lbs.
FMJCH170 150 GPM “170” (1) 2” MNPT 1/2” 62 lbs.
FMJCH3X170 450 GPM “170” (3) 4” flange 3/4” 375 lbs.
FMJCH5X170 750 GPM “170” (5) 6” flange 3/4” 575 lbs.
FMJCH8X170 1200 GPM “170” (8) 8” flange 3/4” 600 lbs.
Flow-Max ® Filters
Adjustable compression cap
Provides superior sealing at
both cartridge ends.
Standard models Jumbo cartridges FMJCH3X170