Watts LFWP13B - Manual

LFWP10
Male Sweat x Crimp
Adapter
LFWP11
Female Sweat x Crimp
Adapter
LFWP13
Crimp x FPT Threaded
Adapter
LFWP12
Crimp x MPT Threaded
Adapter
* The wetted surface of this product contacted by consumable water
contains less than one quarter of one percent (0.25%) of lead by
weight.
Lead Free * Brass
CrimpRing ™ Adapters
For Residential and Commercial Applications
ES-WP-LFBrassAdapters
Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location ––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––
LEAD FREE
*
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with-
out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Lead Free* Brass CrimpRing ™ Sweat Adapters are used to tran-
sition copper pipe to WaterPEX ® supply lines. Threaded Adapt-
ers are used for the appropriate NPT fitting. The Lead Free*
brass CrimpRing ™ Adapters feature Lead Free* construction.
Specifications
System shall be plumbed using Watts cross-linked polyethyl-
ene pipe. All joints shall be made using Watts Lead Free* brass
CrimpRing ™ and/or Poly-alloy CrimpRing ™ fittings using either
the Watts copper CrimpRing ™ or stainless steel CinchClamp ™ *
crimping methods as outlined in the Watts Installation Guide-
lines. The CrimpRing ™ adapters shall be constructed using Lead
Free* brass. Lead Free* Brass CrimpRing ™ adapters shall com-
ply with state codes and standards, where applicable, requiring
reduced lead content.
Installation Note
Lead Free* Brass CrimpRing ™ Adapters must be installed in
accordance with all Watts installation procedures, including
information provided in installation manual and guidelines.
Approvals
• Manufactured in accordance with American Society for
Testing and Materials (ASTM International) F877 and F1807
• Listed by the NSF International to NSF Standards 14 and 61
for use in potable water systems
• Listed by NSF International to be in compliant to the Uniform
Plumbing Code
• Labeled B137.5 which indicates that it is compliant to the
CSA Standards B137.5
Note: Watts CinchClamp ™ fittings should not be used with
wrought copper PEX fittings.